The water level that prompts the starting and stopping of the pump can be adjusted by changing the length of the float cable.
N.B. The length of the float cable must never be shorter than 10 cm.
In the case of manual operation:
a) The float switch must be lifted in order to start pumps with a float.
b) For pumps without a float, insert the plug.
Before starting the pump check that:
- The voltage and frequency specified on the pump’s nameplate data plate coincide with those of the available power supply;
- there are no signs of damage to the pump or its power cord;
- the electric connection is made in a dry place, protected against any risk of flooding;
- the electric system is complete with a residual current circuit-breaker (I ∆ ≤ 30 mA) and an efficient earthing connection;
- Any extension cords must comply with the requirements of regulation DIN VDE 0620.
The Nova Salt W pumps are very easy to install, and they do not require any configuration. In the instruction manual of the Nova Salt W and in our DNA software there is the procedure for using the pump in manual or automatic mode. In the case of operation in automatic mode, the float switch starts and stops the pump automatically.
