The Novapond pumps are very easy to install, and they do not require any configuration. In the instruction manual of the Novapond and in our DNA software there is the procedure for using the pump in manual or automatic mode. In the case of operation in automatic mode, the float switch starts and stops the pump automatically. The water level that prompts the starting and stopping of the pump can be adjusted by changing the length of the float cable.
N.B. The length of the float cable must never be shorter than 10 cm.
Manual operation:
a) The floating switch must be lifted in order to start pumps with a float.
b) For pumps without a float, insert the plug.
The voltage and frequency specified on the pump’s nameplate coincide with those of the available power
supply;
• there are no signs of damage to the pump or its power cord;
• the electric connection is made in a dry place, protected against any risk of flooding;
• the electric system is complete with a residual current circuit-breaker (I ∆ ≤ 30 mA) and an efficient earthing connection;