The KVE pump is a KV pump with standard MCE- P inverter.
To enter the installer menu, which allows you to change the operating parameters of the inverter, simultaneously press the "mode" "set" "-" buttons for about 5 seconds, until "installer menu" appears on the display. Now the "+" and "-" buttons allow you to increase and decrease the value of the parameter. To learn more about this topic, you can register free for our online course MCE-P tutorial organized by the D.Training, aimed at installers, plumbers or interested people. We recommend you read the MCE-P instruction manual (also available on our DNA software) for all information on the use of the product. The instruction manual of the KVE.

Before starting up, check that the pump is properly primed; fill it completely with clean water by means of the hole provided after having removed the filler cap on the discharge body. This ensures that the mechanical seal is well lubricated and that the pump immediately starts to work regularly.
We recommend you read the instruction manual of the KVE (also available in our DNA software) for all information on the product. The KVE pump is a KV pump with the MCE- P inverter installed as a standard feature. To learn more about this topic, you can register free for our online course MCE-P tutorial organized by D.Training, aimed at installers, plumbers or interested people.

We recommend you read the instruction manual of the KVE (also available in our DNA software) for all information on the product. The KVE pump is a KV pump with the MCE- P inverter installed as a standard feature. To learn more about this topic, you can register free for our online course MCE-P tutorial organized by D.Training, aimed at installers, plumbers or interested people.

The direction of rotation may be inverted only in three-phase pumps (therefore pumps powered at 400 volts). In single-phase pumps (230 volts) the motor always rotates in the correct direction.The direction of rotation must be clockwise as shown in the figure and as indicated by the arrow stamped on the fan cover:

We recommend you read the instruction manual of the KVE (also available in our DNA software) for all information on the product. The KVE pump is a KV pump with the MCE- P inverter installed as a standard feature. To learn more about this topic, you can register free for our online course MCE-P tutorial organized by D.Training, aimed at installers, plumbers or interested people.

We recommend you read the instruction manual of the KVE (also available in our DNA software) for all information on the product. The KVE pump is a KV pump with the MCE- P inverter installed as a standard feature. To learn more about this topic, you can register free for our online course MCE-P tutorial organized by D.Training, aimed at installers, plumbers or interested people.